Skip to content
ros-navigation/navigation2

Partner with Nav2

Sponsorship opportunities & professional services available. Learn More

Build Troubleshooting Guide

Common Nav2 Dependencies Build Failures

  • Make sure that .bashrc file has no ROS environment variables in it. Open new terminals and try to build the packages again.

  • Make sure to run rosdep for the correct ROS 2 distribution.

    rosdep install -y -r -q --from-paths src --ignore-src --rosdistro <ros2-distro>

  • Make sure that the setup.bash is sourced in the ROS 2 installation or ROS 2 main build workspace, if applicable. Check if you can run talker and listener nodes.

  • Make sure that the setup.bash in nav2_depend_ws/install is sourced.

  • Check if you have the correct ROS version and distribution.

    printenv | grep -i ROS

  • If you see a bunch of errors on startup about map or odom frame not existing, remember to activate drivers (or gazebo for simulation) and set an initial pose in map frame. Costmap2D will block activation until a full TF tree is available.

  • Make sure you've activated the lifecycle nodes if you're not seeing transforms or servers running.
  • Search GitHub Issues
  • Make sure you're using the correct branch for your distribution. There is no cross support from branch for DistroA in DistroB. The main development branch uses the rolling distribution.

Still can't solve it? Let us know about your issue. Open a ticket.

Reporting Issue

  • If you run into any issues when building Navigation2, you can use the search tool in the issues tab on GitHub and always feel free to open a ticket.